---
title: "P1000: no fault: the self-test is still running · cause and cost"
description: "No fault. Your Ford, Mazda, Jaguar or Land Rover is still running its self-tests, for example after a battery change."
canonical: https://vroomdoctor.com/codes/p1000
language: en
---


# P1000: No fault: the self-test is still running

No fault. Your Ford, Mazda, Jaguar or Land Rover is still running its self-tests, for example after a battery change. After a few drives with a warm engine, the code is gone.

No rushYou can keep driving. Nothing is broken.

9:41Golf 1.4 TSI

1 fault found

P1000

No fault: the self-test is still running

How badNo rushDrivingYesAsk your Golf something…↑

**How bad:**

No rush

**Do it yourself:**

Yes, you can do it yourself

**Usually:**

Battery disconnected or replaced

**Garage:**

No repair needed

## What you notice

- You notice nothing, the car drives normally

- The engine warning light usually stays off

- The code appears after a battery change or after clearing codes

## What usually causes it

| Cause | Likelihood |
| --- | --- |
| Battery disconnected or replaced | Common |
| Fault codes recently cleared | Common |
| Engine computer reprogrammed | Sometimes |
| Only short trips (the tests do not finish) | Sometimes |

A code points to the area. Sometimes the garage only finds the real cause after that.

## How to fix it

Start with what costs least.

- 1Drive normally a few times, mixing town and country roads. Exactly how long differs per engine.

- 2Let the engine get properly warm while you do.

- 3Read the codes again. If P1000 is gone, all tests are done.

- 4Is P1000 still there after a week of normal driving? Have the codes read to see which self-test does not finish. Another fault is behind it.

## If you wait

After a battery change or clearing codes

The self-tests start again. P1000 is stored in memory.

Normal drives with a warm engine

The tests finish one by one. Then P1000 disappears.

P1000 still there after a week

Have the codes read to see which test does not finish. That is where the cause is.

At the APK

If the tests are not finished, a standard exhaust gas test follows.

## Background

How it works ›

### What self-tests are

The OBD system tests the catalytic converter, the lambda sensors and other parts itself while you drive. European rules require the system to track for each part whether the test has run yet. This is called the self-test status, or readiness.

Ford uses P1000 to report that not all of these self-tests are done yet. On iATN, an American forum for mechanics, the description is OBD II Monitor Testing Not Complete.

### Why P1000 stays

Each test has its own conditions, such as a warm engine and a certain speed. On a car that only makes short trips, some tests do not run. A mechanic on iATN describes a Ford F-250 where the tests for the catalytic converter, lambda sensors and vapour system had not finished after several attempts.

If P1000 stays while you also make longer drives, there is a fault behind the test that does not finish.

### P1000 and the APK

The APK (the Dutch MOT) inspector checks whether the self-tests are complete. If not, he measures the exhaust gases the normal way. So P1000 alone does not make you fail the APK. You do get the more extensive test.

### In numbers

**Description (Ford):**

OBD II Monitor Testing Not Complete1

**What the system tracks:**

For each part, whether the test has run yet2

**APK with tests not finished:**

Standard exhaust gas test instead of an OBD readout3

**Engine warning light at the APK:**

Must come on when you switch on the ignition3

## Questions

### Should I clear the code?

No. Clearing sets the self-tests back to zero. Then it takes longer for P1000 to go away.

### Which makes use P1000?

Mainly Ford, Mazda, Jaguar and Land Rover. On other makes, P1000 can mean something else. Look up the code for your make.

### How long does it take for P1000 to go away?

Usually a few normal drives with a warm engine. With short, cold trips it takes longer.

### Is P1000 a problem at the APK (the Dutch MOT)?

Usually not. You then get the standard exhaust gas test. So after a battery change or clearing codes, do a few normal drives first.

## See also

- [P0420: Catalytic converter efficiency too low (bank 1)](https://vroomdoctor.com/codes/p0420)

- [P0442: Small leak in the vapour system](https://vroomdoctor.com/codes/p0442)

- [P0133: Lambda sensor slow response (bank 1, sensor 1)](https://vroomdoctor.com/codes/p0133)

- [Engine warning light](https://vroomdoctor.com/nl/waarschuwingslampjes/motorstoringslampje)

Was this helpful?

19 November 2026 · 3 sources · [In het Nederlands](https://vroomdoctor.com/nl/storingscodes/p1000)

## Sources

All sources checked on 19 November 2026.

- [iATN, P1000 DTC (technician discussion)](https://www.iatn.net/techmail/summaries/2006/09/P1000-dtc.html)

- [UNECE Regulation No. 83, Annex 11 (OBD), paragraphs 3.3 to 3.8](https://www.transportpolicy.net/wp-content/uploads/2021/08/UNECE-R83.pdf)

- [RDW, APK manual Regulations, articles 42 and 45a to 45g (version from 1 January 2024) (in Dutch)](https://www.rdw.nl/-/media/apk-handboek/pdf/apk-handboek-regelgeving-januari-2022.pdf)

## Your phone sees P1000 before you do.

Vroom Doctor is a small device that sits under your steering wheel. The app is free.

[Pre-order for €59](https://vroomdoctor.com/order)
