| Read it yourself (Vroom Doctor) | Garage | |
|---|---|---|
| Cost | €59 one-off | €25 to €60 per visit on average (ANWB) |
| When | Right away, on the road too | By appointment |
| Faults that come and go | Keeps logging while you drive | Only what’s stored at that moment |
| Repair | No | Yes |
| Modules other than the engine | No | With dealer or garage software |
What does a reading at the garage cost?
The ANWB says €25 to €60 on average for just the reading, with extra costs for clearing codes. If you have the repair done straight away, the reading is often free.
What do you get when you read it yourself?
The fault code, what it means, how bad it is and a price estimate. Then you go to the garage with a concrete question.
Vroom Doctor stays plugged in and logs while you drive. So you also see a fault that’s already gone by the time you’re home.
When do you need the garage?
For the repair itself, and for systems outside the engine such as ABS and airbag. A code points the way and the garage finds the cause.
What if the garage says something else?
Ask which code and which measurement the garage sees. A code points to a system and rarely to one single part.
Sources
- ANWB: reading your car’s fault codes (Dutch)
- SAE J1979 summarised: OBD-II PIDs on Wikipedia
- SAE J1962 and fault codes: On-board diagnostics on Wikipedia
Background

How it works ›
What does an OBD plug read, and what does the garage read?
An OBD scanner reads the generic fault codes, such as P0171 or P0420. According to the ANWB, an affordable OBD scanner lets you read and clear the basic fault codes.
The SAE J1979 standard sets out what data a car gives through the port: current readings, the moment of the fault, stored codes and clearing them. A code with a 1 as the second character is set by the manufacturer itself.
A code tells you which system is off and leaves the cause open. The ANWB gives P0101 as an example. That code reports a wrong signal from the mass airflow sensor, while the mass airflow sensor itself may be fine.
In numbers
Questions
Am I allowed to clear fault codes myself?
Yes. Only do it after the repair, because clearing also resets the car’s self-tests, and the APK (the Dutch MOT) can check those.
Does the garage read more than an OBD plug?
Often, yes. With brand or garage software they also read modules such as ABS and airbag.
Is a reading at the garage free?
Sometimes. According to the ANWB, often yes if you have the repair done there straight away.
See also
Was this helpful?
· 3 sources · In het Nederlands