---
title: "Reading a fault code: how to do it yourself | Vroom Doctor"
description: "You can read a fault code yourself with an OBD scanner in the OBD port and an app. The first letter of the code tells you which part of the car the fault."
canonical: https://vroomdoctor.com/guides/reading-your-fault-code-yourself
language: en
---


# Reading your fault code yourself

Plug a scanner into the port under your steering wheel, switch the ignition on and read the codes. A code points to the area, not always the part.

9:41Golf 1.5 TSI

1 fault found

P0302

Cylinder 2 misfire

How badThis weekDrivingShort trips, calmlyUsuallyPlug or coilAsk your Golf something…↑

## What you need

You need an OBD scanner. That’s a little box with a screen, or a small plug that talks to your phone.

Cheap plugs (ELM327) read the engine. For ABS and airbag you need a more expensive one.

Vroom Doctor is one of those plugs, with a free app that explains the code. It reads the engine, not ABS or airbag.

Some plugs only work with Android.

## Step by step

- 1Find the port: under the dashboard, to the left of the steering wheel.

- 2Engine off, scanner in, ignition on.

- 3Read the codes. Take a screenshot, including of ‘pending’ codes.

- 4Also look at the freeze frame: engine speed, temperature and speed when it went wrong.

## What the letters mean

Every code has 5 characters. The first letter tells you which part of the car the fault is in. The second character tells you whether it’s a generic code or a manufacturer code.

The last 3 digits point to the problem itself. P0300: random cylinder misfire. P0301: cylinder 1 misfire.

| Character | Meaning | Example |
| --- | --- | --- |
| P | Powertrain: engine, exhaust and gearbox | P0420, catalytic converter |
| C | Chassis: ABS, brakes and suspension | C0035, wheel speed sensor |
| B | Body: airbag, lighting and comfort | B0001, driver airbag |
| U | Network: communication between computers | U0100, no contact with the engine computer |
| 0 as second character | Generic code, the same for every make | P0171, mixture too lean |
| 1 as second character | Manufacturer code | P1xxx, meaning differs per make |

## After reading

Look up the code. Look at the meaning and at the most common causes. A code points to a system and rarely to one part.

P0171, for example, means the mixture is too lean. That can be an air leak, a dirty mass air flow sensor or a weak fuel pump. Start with the cheapest and most likely cause.

If there are several codes, look at which came first. Low battery voltage, for example, can cause a whole string of other codes.

Also check whether the code is confirmed or pending. A pending code is one the car has seen once. A confirmed code has happened more often and usually turns on the engine light.

## Clearing

You can, but only once you’ve written the code down and fixed the cause. A cleared code comes back if the problem is still there.

After clearing, the car runs its self-tests again. Until they’re done, the scanner reports that the monitors aren’t ready. So don’t clear codes just before the APK (the Dutch MOT).

## When to go to the garage anyway

If the engine light flashes or a red light is on, have the car checked soon. The same goes for codes to do with brakes, airbag or steering.

If the cheap steps don’t sort it, the garage has better equipment. It can run tests per make and control parts. Take your code and the freeze frame with you.

## Background

How it works ›

### In numbers

**P0 codes:**

standard codes, the same for every make2

**P1 codes:**

manufacturer codes2

**Engine light goes off by itself:**

after 3 consecutive drive cycles without the fault3

**Reading codes at the garage (ANWB):**

€25 to €601

**APK after clearing:**

self-tests not finished, then an exhaust gas test follows4

## Questions

### Can I read a fault code with my phone?

Yes, with a small plug in the port and an app. Without the plug your phone can’t do it.

### Does every scanner read all fault codes?

No. Cheap scanners usually only read the engine computer. For ABS, airbag and gearbox you often need a more expensive scanner.

### Does the engine light go off if I clear the code?

Yes, until the fault comes back. Only clear it once the problem is gone.

## See also

- [Where is the OBD port in my car?](https://vroomdoctor.com/guides/where-is-the-obd-port)

- [Resetting the engine light: how to do it and when not to](https://vroomdoctor.com/guides/resetting-the-engine-light)

- [What does it cost to have your car’s codes read?](https://vroomdoctor.com/guides/what-does-it-cost-to-have)

- [P0420: Catalytic converter efficiency too low (bank 1)](https://vroomdoctor.com/codes/p0420)

- [P0171: Too little petrol (bank 1)](https://vroomdoctor.com/codes/p0171)

- [P0300: Random or multiple cylinder misfire](https://vroomdoctor.com/codes/p0300)

- [P1000: No fault: the self-test is still running](https://vroomdoctor.com/codes/p1000)

- [U0100: Lost communication with the engine computer](https://vroomdoctor.com/codes/u0100)

- [Read your car yourself or at the garage?](https://vroomdoctor.com/compare/read-your-car-yourself)

Was this helpful?

19 November 2026 · 4 sources · [In het Nederlands](https://vroomdoctor.com/nl/gidsen/foutcode-uitlezen)

## Sources

- [ANWB: having your car’s codes read (Dutch)](https://www.anwb.nl/auto/onderhoud-en-reparatie/garage/auto-uitlezen)

- [EUR-Lex: Directive 1999/102/EC, OBD requirements (diagnostic connector and fault codes) (Dutch)](https://eur-lex.europa.eu/legal-content/NL/TXT/HTML/?uri=CELEX:31999L0102)

- [EUR-Lex: Directive 98/69/EC, Annex XI on OBD systems (Dutch)](https://eur-lex.europa.eu/legal-content/NL/TXT/HTML/?uri=CELEX:31998L0069)

- [RDW APK manual: noise and environment (Dutch)](https://apk-handboek.rdw.nl/personenautos/motor/geluid-en-milieu)

## Reading codes can happen by itself.

Vroom Doctor is a small device that sits under your steering wheel. The app is free.

[Pre-order for €59](https://vroomdoctor.com/order)
