---
title: "What does it cost to have your car’s codes read?"
description: "According to the ANWB (the Dutch motoring club), having your car’s codes read usually costs €25 to €60."
canonical: https://vroomdoctor.com/guides/what-does-it-cost-to-have
language: en
---


# What does it cost to have your car’s codes read?

Just the fault codes: €25 to €60 according to the ANWB, and often free if the garage also does the repair. If the mechanic has to dig deeper, you pay half an hour to an hour of labour.

9:41Golf 1.5 TSI

1 fault found

P0302

Cylinder 2 misfire

How badThis weekDrivingShort trips, calmlyUsuallyPlug or coilAsk your Golf something…↑

## What the garage charges

There’s no fixed price. Garages charge a fixed amount, half an hour of labour or a full hour of labour.

For just reading the fault codes, €25 to €60 is usual, according to the ANWB. If the same garage does the repair, many garages don’t charge separately for reading the codes.

| What you have done | Usual price | What you get |
| --- | --- | --- |
| Just reading fault codes | €25 to €60 | A list of codes and a short explanation |
| Reading and clearing codes | €25 to €60, sometimes a bit more | Codes read and cleared |
| Diagnosis, half an hour | Half an hour of labour | Codes, live data checked and a first cause |
| Diagnosis, full hour | An hour of labour | Measurements, tests and specific advice |
| Diagnosis at the brand dealer | Often higher than an independent garage | Brand equipment and software updates |

## Reading codes or diagnosis

Reading codes means getting them out of the memory. That takes a few minutes. You then know which system sees something wrong.

A diagnosis goes further. The mechanic looks at live data, measures and tests parts. After that you know which part is broken.

P0171, for example, only says the mixture is too lean. A diagnosis tells you whether it’s an air leak, the mass air flow sensor or the fuel pump.

A good garage explains what it measured. If you only get a code and a price for a new part, ask what was tested.

## Not paying too much

Ask beforehand what reading the codes costs and whether it’s free with a repair. Agree a maximum for the diagnosis, for example half an hour.

Ask for the fault codes on paper or by email. Then you can look them up yourself and ask another garage for a price.

Don’t just let them replace parts based on a code alone. Ask why the mechanic suspects that particular part.

Ask whether they also read other systems, like ABS and airbag. Some garages only read the engine as standard.

## What you take home

A code like P0420 is something you can look up and compare anywhere.

Ask whether the codes are confirmed or pending. Also ask whether they’ve been cleared. If the code was cleared and the light comes on again, the problem is still there.

Keep the overview with your maintenance papers. That’s handy for the next fault or when you sell the car.

## Reading codes yourself

You can. With an OBD scanner in the OBD port under the dashboard, you read the engine codes yourself.

The Vroom Doctor module costs €59 and stays in your car. You can read codes as often as you like, without a garage. The app tells you in plain language what the code means and roughly what the repair costs.

For ABS, airbag and brand-specific systems you need a more expensive scanner, or you go to the garage after all.

If you do go to the garage, bring your own codes. Then the mechanic can get started faster.

## When to go to the garage anyway

Go to the garage for red lights, problems with brakes or airbag, and faults you can’t find yourself. The garage has equipment that can test and control parts per make.

After replacing some parts, the car has to learn something or be coded. That usually only works with garage equipment.

## Background

How it works ›

### In numbers

**Just reading codes (ANWB):**

€25 to €601

**Reading codes with a repair at the same garage:**

often free1

**Resetting fault codes:**

sometimes extra cost1

**BOVAG garage must let you know:**

if the price looks set to go more than 10 percent higher2

## Questions

### Is reading car codes free at the garage?

Sometimes. Many garages don’t charge for reading the codes if they also do the repair. Otherwise you usually pay €25 to €60, according to the ANWB.

### How long does reading a car’s codes take?

A few minutes for the codes. A diagnosis takes half an hour to an hour, sometimes longer.

### Is a brand dealer more expensive for reading codes?

Often, yes, because the hourly rate is higher. For just reading codes, an independent garage is usually good enough.

## See also

- [Reading your fault code yourself](https://vroomdoctor.com/guides/reading-your-fault-code-yourself)

- [Where is the OBD port in my car?](https://vroomdoctor.com/guides/where-is-the-obd-port)

- [Read your car yourself or at the garage?](https://vroomdoctor.com/compare/read-your-car-yourself)

- [Best OBD2 scanner in 2026: prices and subscriptions compared](https://vroomdoctor.com/compare/best-obd2-scanner-in-2026)

- [P0171: Too little petrol (bank 1)](https://vroomdoctor.com/codes/p0171)

- [Engine warning light](https://vroomdoctor.com/warning-lights/engine-light)

Was this helpful?

19 November 2026 · 2 sources · [In het Nederlands](https://vroomdoctor.com/nl/gidsen/auto-laten-uitlezen-kosten)

## Sources

- [ANWB: having your car’s codes read (Dutch)](https://www.anwb.nl/auto/onderhoud-en-reparatie/garage/auto-uitlezen)

- [ANWB: maintenance costs of your car (Dutch)](https://www.anwb.nl/auto/onderhoud-en-reparatie/garage/kosten-onderhoud-auto)

## Reading codes can happen by itself.

Vroom Doctor is a small device that sits under your steering wheel. The app is free.

[Pre-order for €59](https://vroomdoctor.com/order)
