Skip to contentBlack Friday · Reserve for €59 €69 after launch Reserve ›

Replacing the injectors: what does it cost?

A dirty or worn injector gives rough running and black smoke. First have it tested to see which one is off. Often the whole set doesn’t need to come out.

This weekGet it checked this week. Avoid long trips under heavy load.

How bad
This week
Do it yourself
Hard, you need experienceOn a common rail diesel the correction code of a new injector has to be entered into the engine computer. Without that step the system doesn’t work as intended. Removing diesel injectors often needs special tools.
Lasts
No fixed term, often well over 150,000 km

Prices

Including 21% VAT, 19 November 2026. Where do they come from? ›

Part only

€117

Middle of 2, €48 to €186.

Without fitting. A garage often replaces more parts with it.

What it does

Injectors spray fuel into the engine in precisely measured portions. On modern diesels that happens at very high pressure. Dirt or wear upsets the spray pattern.

How you notice

  • Rough idle, especially when cold
  • Black smoke from the exhaust
  • You use more fuel
  • Hard starting
  • Misfire code, such as P0300

If you wait

  1. Injector gets dirty

    You use more fuel. The engine loses power and idles roughly.

  2. Spray pattern gets worse

    The car starts with difficulty. The exhaust gas values get worse. The engine warning light can come on.

  3. Fuel in the exhaust

    Unburnt fuel can damage your catalytic converter and diesel particulate filter.

  4. Injector drips after shutting

    It can burn a hole in the piston.

Background

Air filterMass airflow sensorThrottleInjectorIntake manifoldTo exhaustPistonFuel tankFuel pump
How the air and fuel mixture is made
How it works ›

How an injector works

Each cylinder has its own injector. The engine computer sends an electrical pulse to a coil. The needle then lifts off its seat. The fuel sprays through a precisely drilled opening.

The pressure varies a lot by system. With indirect petrol injection it’s 3 to 6 bar, with direct petrol injection up to 350 bar and with a modern common rail diesel up to 2,500 bar.

What makes an injector fail

Dirty fuel blocks the strainer or the opening. Combustion residue and deposits from additives stop the needle from closing properly. With direct injection, carbon build-up is the most common problem according to Auto Bild.

Electrical causes are a short circuit in the coil and a broken cable to the engine computer.

If you keep driving with it

Unburnt fuel can damage the catalytic converter and the diesel particulate filter. A fuel jet that’s aimed wrong can wash the oil film off the cylinder wall.

An injector that drips after shutting can burn a hole in the piston. Auto Bild advises against driving on with a faulty injector.

In numbers

Pressure, indirect petrol injection
About 3 to 6 bar2
Pressure, direct petrol injection
Up to 350 bar2
Pressure, common rail diesel
Up to 2,500 bar2
Lifespan
No fixed term, often well over 150,000 km2
After replacement
Program the new injector’s correction code into the engine computer3
Knock-on damage
Catalytic converter and diesel particulate filter1

Questions

How do you know which injector is broken?

A garage measures the leak-off or reads the correction values per cylinder. If one injector is way off, that’s the suspect.

Does an injector cleaner in the tank help?

Sometimes, with light dirt. It won’t fix a worn injector.

Can a leaking injector damage the engine?

Yes. On a diesel an injector that keeps dripping can damage the piston. Don’t wait too long.

See also

Was this helpful?

· 3 sources · In het Nederlands

Sources

All sources checked on 19 November 2026.

  1. HELLA Tech World, Injection nozzle
  2. Auto Bild, Einspritzdüsen und Injektoren: Defekte, Symptome und Reinigung
  3. Delphi, How to program and replace a common rail injector