Skip to contentBlack Friday · Reserve for €59 €69 after launch Reserve ›

Tyre pressure light

One or more tyres have too little pressure, or the system itself has a fault. Pump up to the value in the door frame or fuel flap.

This weekPark somewhere safe and look at your tyres. Pump them up as soon as you can. If a tyre is visibly soft, don’t drive on.

If it stays on
One or more tyres have too little pressure.
If it flashes
The system itself has a fault, often a sensor.
Read it yourself
Yes, with an OBD reader
Garage
€27 to €55 to read it

What the light does

Flashes for about a minute and then stays on
The system itself has a fault, often a sensor.
Stays on
One or more tyres have too little pressure.
On after a cold night
Cold lowers the pressure. Pump up.

What usually causes it

CauseLikelihood
Tyre pressure too lowCommon
Slow puncture from a nail or the valveSometimes
System not reset after pumping upSometimes
Flat battery in a tyre sensorSometimes

How to deal with it

  1. 1Look whether a tyre is visibly softer.
  2. 2Measure all tyres at a petrol station. Pump up to the value in the door frame or fuel flap.
  3. 3Reset the system through the menu or the button. On many cars you then need to drive a while.
  4. 4On again after a few days? Get the tyre checked for a leak.
  5. 5If the light flashes, a sensor is broken.

If you keep driving

  1. Light comes on

    One or more tyres have lost a lot of air. Park safely and look at the tyres.

  2. Pressure keeps dropping

    A tyre may be punctured. Get it checked or call roadside assistance.

  3. At the APK

    First registered 2018 or later: fail if the light stays on.

Background

FrontMaster cylinderBrake lineABS unit withpump and valvesABS sensorWheelSensors measure wheel speed
How ABS works
How it works ›

Two kinds of system

A direct system has a battery-powered sensor in each wheel that sends pressure and temperature by radio. An indirect system has no extra sensor. It spots pressure loss from a smaller tyre circumference, through the ABS sensors. Cars from the Volkswagen group use that indirect system.

If you have a direct system, your winter wheels need sensors too.

What the light means

According to Kia, the light comes on when one or more tyres have lost a lot of air, or when the system itself has a fault. According to the ANWB one of the tyres then has too little pressure. It may be punctured. Park safely and check the tyres.

With the ignition on, the light shows for about 3 seconds as a test.

Required since 2014

Since 1 November 2014 no new passenger car may be registered in the EU without a tyre pressure monitoring system. For new models that already applied from 1 November 2012.

Since 20 May 2018 the APK (the Dutch MOT) also looks at the warning light. For cars first registered in 2018 or later, a light that stays on means a fail.

In numbers

Required on new cars
from 1 November 20142
Required on new models
from 1 November 20122
Bulb test (Kia)
about 3 seconds1
Indirect system
measures through the ABS sensors, no extra sensor3
APK, first registered 2018 or later
fail if the light stays on5

Questions

Why does the tyre pressure light come on when it gets cold?

Cold makes air contract, so the pressure drops. Pump up the tyres and reset the system.

How do I reset the tyre pressure light?

On most cars through the dashboard menu, or a button. First pump all tyres up to the right value.

Can I keep driving with the tyre pressure light on?

Calmly to a petrol station, yes. Driving on a flat tyre is dangerous. It also ruins the tyre.

Was this helpful?

· 5 sources · In het Nederlands

Sources

All sources checked on 19 November 2026.

  1. Kia Sportage owner’s manual (Dutch), warning and indicator lights
  2. Regulation (EU) No 523/2012, article 3 (TPMS)
  3. auto motor und sport, tyre pressure sensors required from November 2014 (German)
  4. ANWB, Warning lights: stop or keep driving? (Dutch)
  5. ANWB, What is an APK inspection? (Dutch)