- How bad
- Within a month
- Do it yourself
- Possible, if you are handy
- Garage
- Depends on the cause
What you notice
- VSC, TRC or slip indicator light is on
- The engine warning light is on
- Stability and traction control do not work
What usually causes it
| Cause | Likelihood |
|---|---|
| Loose or poorly sealing fuel cap with an EVAP code | Common |
| Another engine problem with its own P code, such as a misfire or too little petrol | Common |
| Fault in the throttle body | Sometimes |
| Poor connector or wiring between modules | Rare |
| Faulty ABS or stability module | Rare |
A code points to the area. Sometimes the garage only finds the real cause after that.
How to fix it
Start with what costs least.
- 1Read the engine codes too. C1201 only clears once the engine code is fixed.
- 2Is there an EVAP code? Loosen the fuel cap and tighten it again until it clicks.
- 3Fix the engine code that comes with it, such as a misfire or a mixture fault.
- 4Clear the codes and drive a short distance. The lights should then stay off.
- 5If C1201 comes back without an engine code, have the modules and the wiring tested.
What to ask the garage
- Which other codes are stored, and can I have the printout?
- Which measurement shows that this is the cause?
- What will it cost if you find more? Call me before you go ahead.
If you wait
Code appears
VSC and TRC are off. The car brakes and steers normally.
Engine code fixed
C1201 clears with it.
At the APK
A stability control light that stays on fails the APK on a car from after 31 December 2017.
What it costs
It depends on the cause. Where do the prices come from? ›
| Part | At the garage | Part only |
|---|---|---|
| Fuel cap | Garage none | Part €23 |
| Throttle body | Garage none | Part €133 |
Background
How it works ›
What stability control does
Stability control works together with the ABS and the traction control. Sensors and a computer compare where you are steering with what the car is doing. If they do not match, the system reduces drive power or brakes individual wheels.
To reduce power, the system needs the engine. Toyota and Lexus call it VSC, and the traction control TRC.
What to do about C1201
C1201 is stored in the brake computer. The cause is in the engine management. So read the engine computer and fix the P code stored there. C1201 then clears with it.
At the APK (the Dutch MOT), the OBD check only looks at codes starting with a P. So C1201 does not count there. The P code behind it does.
In numbers
Questions
Why is the VSC light on when something is wrong with the engine?
Toyota and Lexus switch off the stability control when the engine management reports a fault. Without reliable engine data, the system cannot step in safely.
Do other makes use C1201 too?
Codes starting with C1 differ by make. This meaning applies to Toyota and Lexus. On another make, C1201 can mean something else.
Can a fuel cap cause C1201?
Yes. A poorly sealing fuel cap gives an EVAP code. That is enough for the car to switch off VSC.
See also
Was this helpful?
· 3 sources · In het Nederlands
Sources
All sources checked on 19 November 2026.
How we set prices ›
The amounts come from prices that Dutch garages and webshops publish on their own sites, including VAT, or from the source shown next to them. Last collected on 19 November 2026. Your own price depends on your engine and year, so always ask for a quote. The ANWB (the Dutch motoring club) gives an average, which is not a real price, so we leave it out. If your garage asks something very different, email it to hallo@vroomdoctor.com.