- How bad
- Within a month
- Do it yourself
- No, that is a garage job
- Garage
- Depends on the cause
What you notice
- The engine warning light does not come on with the ignition on
- Or the light is always on
What usually causes it
| Cause | Likelihood |
|---|---|
| Faulty bulb or LED in the dashboard | Common |
| Broken wiring between the engine computer and dashboard | Sometimes |
| Fault in the instrument cluster | Sometimes |
| Engine computer not driving it | Rare |
A code points to the area. Sometimes the garage only finds the real cause after that.
How to fix it
Start with what costs least.
- 1Ignition on, do not start. The engine warning light should come on briefly.
- 2Read out all modules, including the instrument cluster.
- 3Have the garage test the control circuit.
- 4Have the instrument cluster or the wiring repaired.
What to ask the garage
- Which other codes are stored, and can I have the printout?
- Which measurement shows that this is the cause?
- What will it cost if you find more? Call me before you go ahead.
If you wait
If the light does not work, you will no longer see a new fault.
First drive with the fault
The computer stores the fault.
Second drive in a row
The computer tries to switch on the engine warning light, if the circuit still allows it.
At the APK
The APK inspector checks whether the light works with the ignition on.
Background

How it works ›
How the engine warning light is switched
The engine warning light gets ignition voltage. The engine computer switches it on by connecting the control wire to earth. With the ignition on and the engine off, the light should be on.
The light comes on for faults that affect emissions.
When the computer sets the code
The Saab 9-4X V6 compares what it tells the light to do with what it measures on the control wire. If the two do not match for longer than 5 seconds, it sets P0650. The test runs continuously at 11 to 32 V.
If the fault comes and goes, the manual has you move the wiring loom and connectors. Meanwhile, a diagnostic tool shows the circuit status.
In numbers
- Light supply
- Ignition voltage, the computer switches the earth1
- Code limit (Saab 9-4X V6)
- Command and circuit differ for longer than 5 s1
- Normal behaviour
- On with the ignition on and the engine off1
- APK requirement
- Light gives a signal with the ignition on4
- Engine warning light on
- On the second drive in a row with the same fault3
Questions
Why does P0650 matter if the light simply does not work?
Without the light, you only notice a new fault when something breaks. The damage is then often greater.
Will P0650 fail the APK?
The APK (the Dutch MOT) inspector checks whether the engine warning light comes on with the ignition on. He compares that with what the diagnostic tool reports about the light. So have it fixed before the APK.
Can I still read the fault codes with P0650?
Yes. The codes are stored, even if the light does not work.
See also
Was this helpful?
· 4 sources · In het Nederlands
Sources
All sources checked on 19 November 2026.