Skip to contentBlack Friday · Reserve for €59 €69 after launch Reserve ›

Where is the OBD port in my car?

Look under the dashboard, to the left of the steering wheel, by your knees. That’s where it is in most cars. Sometimes it’s behind a flap by the fuse box or in the centre console.

What the OBD port is

OBD stands for On-Board Diagnostics. Through this connector you read out your car’s computers. A garage uses it to see fault codes. You plug a scanner or the module into it.

The connector always has the same shape: a trapezium with 16 pins in 2 rows. It’s about 4 centimetres wide. It’s also called the OBD2 port, diagnostic plug or EOBD connector.

In the EU, OBD has been required on all new petrol cars since 1 January 2001. For all new diesels it’s been required since 1 January 2004. For new models the requirement applied a year earlier. Many older cars already have the connector too.

Where it usually is

The European rules require a standardised connector. It has to be easy for the mechanic to reach and protected against damage. In practice it’s almost always near the steering wheel.

Look under the dashboard first, to the left of the steering column. Lie with your head in the footwell and look up. Use your phone torch.

Where it usually is
LocationHow oftenHow to find it
Under the dashboard, left of the steering wheelMost commonLook up from the footwell, above the clutch pedal or the knee panels
Under the dashboard, right of the steering wheelOftenLook above the accelerator or next to the centre console
Behind a flap by the fuse boxSometimesOpen the flap on the side or underside of the dashboard
In the centre consoleSometimesLook behind a cover plate by the handbrake, the ashtray or a storage tray
Behind a loose cover plate with an OBD logoSometimesLook for a small plate you can pop out with your fingers

Can’t find it

Look in your car’s owner’s manual. Search for diagnostics, OBD or diagnostic connector. Sometimes there’s a drawing.

Search online for make, model and year with the words OBD port location. There are lots of photos and videos of your model.

If there’s a flap with a logo or the letters OBD, you’ve found it. You never have to unscrew anything. If you have to take panels off, you’re looking in the wrong place.

Or ask your garage. For most cars a mechanic knows within a few seconds where it is.

How to recognise it

There are often more plugs and wiring looms under the dashboard. The OBD port is the only one fixed into the panel. The opening points down or towards you.

It always has 16 pins in 2 rows of 8. The housing is wider on 1 side than the other. It’s often black, sometimes white or grey.

If it hangs loose on a cable or has a different shape, it’s a different connector. Don’t plug anything into it.

What you can plug into it

A normal OBD scanner or the module can’t do any harm. They only read data, like fault codes, coolant temperature and battery voltage.

Push the plug straight in until it’s firm. It only fits 1 way. Don’t force anything, the pins can bend.

Some cheap dongles keep drawing power when the car is off. With a weak battery that can cause problems after a few weeks of standing still. Take a dongle like that out if the car will stand for a long time.

On an electric car

Electric cars have an OBD port too, usually in the same place. You use it to read fault codes and battery data.

Electric cars don’t have to provide emissions data. So a lot of the data is brand-specific. A normal scanner then sees less than on a petrol or diesel car.

Background

Vroom Doctor in the OBD port under the steering wheel, above the pedals
How it works ›

In numbers

OBD required, petrol
new models since 1 January 2000, all new cars since 1 January 20011
OBD required, diesel
new models since 1 January 2003, all new cars since 1 January 20041
Standard for the connector
ISO 15031-3 (SAE J1962)1
Location according to the rules
easily accessible for servicing1
Reading codes at the garage (ANWB)
€25 to €603

Questions

Does my car have an OBD port?

Yes, if it’s a petrol car from 2001 or a diesel from 2004 from the EU. Many older cars have one too.

What does an OBD port look like?

A trapezium with 16 pins in 2 rows.

Can an OBD scanner damage my car?

No, not if it only reads. Be careful with apps that change settings or code parts.

Can I leave the module in while I drive?

Yes, as long as it stays clear of your legs and the pedals. The module then logs data while you drive.

See also

Was this helpful?

· 3 sources · In het Nederlands

Sources

  1. EUR-Lex: Directive 1999/102/EC, OBD requirements (diagnostic connector and fault codes) (Dutch)
  2. EUR-Lex: Directive 98/69/EC, Annex XI on OBD systems (Dutch)
  3. ANWB: having your car’s codes read (Dutch)