Skip to contentBlack Friday · Reserve for €59 €69 after launch Reserve ›

What does it cost to have your car’s codes read?

Just the fault codes: €25 to €60 according to the ANWB, and often free if the garage also does the repair. If the mechanic has to dig deeper, you pay half an hour to an hour of labour.

What the garage charges

There’s no fixed price. Garages charge a fixed amount, half an hour of labour or a full hour of labour.

For just reading the fault codes, €25 to €60 is usual, according to the ANWB. If the same garage does the repair, many garages don’t charge separately for reading the codes.

What the garage charges
What you have doneUsual priceWhat you get
Just reading fault codes€25 to €60A list of codes and a short explanation
Reading and clearing codes€25 to €60, sometimes a bit moreCodes read and cleared
Diagnosis, half an hourHalf an hour of labourCodes, live data checked and a first cause
Diagnosis, full hourAn hour of labourMeasurements, tests and specific advice
Diagnosis at the brand dealerOften higher than an independent garageBrand equipment and software updates

Reading codes or diagnosis

Reading codes means getting them out of the memory. That takes a few minutes. You then know which system sees something wrong.

A diagnosis goes further. The mechanic looks at live data, measures and tests parts. After that you know which part is broken.

P0171, for example, only says the mixture is too lean. A diagnosis tells you whether it’s an air leak, the mass air flow sensor or the fuel pump.

A good garage explains what it measured. If you only get a code and a price for a new part, ask what was tested.

Not paying too much

Ask beforehand what reading the codes costs and whether it’s free with a repair. Agree a maximum for the diagnosis, for example half an hour.

Ask for the fault codes on paper or by email. Then you can look them up yourself and ask another garage for a price.

Don’t just let them replace parts based on a code alone. Ask why the mechanic suspects that particular part.

Ask whether they also read other systems, like ABS and airbag. Some garages only read the engine as standard.

What you take home

A code like P0420 is something you can look up and compare anywhere.

Ask whether the codes are confirmed or pending. Also ask whether they’ve been cleared. If the code was cleared and the light comes on again, the problem is still there.

Keep the overview with your maintenance papers. That’s handy for the next fault or when you sell the car.

Reading codes yourself

You can. With an OBD scanner in the OBD port under the dashboard, you read the engine codes yourself.

The Vroom Doctor module costs €59 and stays in your car. You can read codes as often as you like, without a garage. The app tells you in plain language what the code means and roughly what the repair costs.

For ABS, airbag and brand-specific systems you need a more expensive scanner, or you go to the garage after all.

If you do go to the garage, bring your own codes. Then the mechanic can get started faster.

When to go to the garage anyway

Go to the garage for red lights, problems with brakes or airbag, and faults you can’t find yourself. The garage has equipment that can test and control parts per make.

After replacing some parts, the car has to learn something or be coded. That usually only works with garage equipment.

Background

Vroom Doctor in the OBD port under the steering wheel, above the pedals
How it works ›

In numbers

Just reading codes (ANWB)
€25 to €601
Reading codes with a repair at the same garage
often free1
Resetting fault codes
sometimes extra cost1
BOVAG garage must let you know
if the price looks set to go more than 10 percent higher2

Questions

Is reading car codes free at the garage?

Sometimes. Many garages don’t charge for reading the codes if they also do the repair. Otherwise you usually pay €25 to €60, according to the ANWB.

How long does reading a car’s codes take?

A few minutes for the codes. A diagnosis takes half an hour to an hour, sometimes longer.

Is a brand dealer more expensive for reading codes?

Often, yes, because the hourly rate is higher. For just reading codes, an independent garage is usually good enough.

See also

Was this helpful?

· 2 sources · In het Nederlands

Sources

  1. ANWB: having your car’s codes read (Dutch)
  2. ANWB: maintenance costs of your car (Dutch)