Skip to contentBlack Friday · Reserve for €59 €69 after launch Reserve ›

Replacing the camshaft sensor: what does it cost?

€89

One garage price.

With a broken camshaft sensor your car usually still drives. But it starts worse and can go into limp mode.

Within a monthYou can usually keep driving. Get it fixed within a month.

How bad
Within a month
Do it yourself
Possible, if you are handyThe sensor usually sits on top of or beside the cylinder head, often with 1 bolt. Does the fault come back with a new sensor? Then the timing may have shifted. Have a garage measure that.

Prices

Including 21% VAT, 19 November 2026. Where do they come from? ›

Garage, with labour

€89

One price.

Your garage charges something else? Tell us ›

Part only

€24

Middle of 2, €23 to €25.

Without fitting. A garage often replaces more parts with it.

What it does

The camshaft sensor measures the position of the camshaft. That’s how the engine computer knows which cylinder is in which stroke. Together with the crankshaft sensor it decides when to inject and ignite.

How you notice

  • Starting takes longer or goes badly
  • Engine warning light with P0340
  • Less power or limp mode
  • Stuttering when you pull away

If you wait

  1. Signal is off

    The engine warning light comes on. The engine computer stores a fault code.

  2. Starting gets harder

    The car starts worse and can jerk. You lose power.

  3. Emergency program

    The engine computer switches to an emergency program.

  4. Fault comes back

    Have the timing chain checked. A stretched chain shifts the timing.

Background

CamshaftsCrankshaftTensionerWater pumpTiming beltTiming marks keep crankshaft and camshaft in step
How the crankshaft and camshaft run together
How it works ›

What the camshaft sensor does

The camshaft sensor tracks the position and speed of the camshaft. The camshaft decides when the valves open and close.

The engine computer combines this signal with the one from the crankshaft sensor. That’s how it knows when cylinder 1 is at top dead centre and when to inject and ignite.

What causes the fault

HELLA lists mechanical damage, a broken toothed wheel on the camshaft, an internal short circuit and a broken connection to the engine computer.

The timing also depends on the timing chain. A worn or stretched chain makes the camshaft turn at the wrong moment. A new sensor won’t fix that.

If you keep driving with it

The car starts with difficulty, can jerk and loses power. The engine computer can switch to an emergency program.

The sensor can usually be replaced on its own. That’s much cheaper than a new camshaft.

In numbers

Measures
Position and speed of the camshaft1
Sensor type
Hall sensor that reads a toothed wheel on the camshaft2
Supply voltage
About 5 volts, the manufacturer’s spec comes first2
Works with
The crankshaft sensor2
Can be replaced on its own
Usually yes, the camshaft itself stays in1

Questions

Can you keep driving with a broken camshaft sensor?

Often you can. The engine computer then puts the car in an emergency program. It starts with more difficulty and has less power.

Could it also be the timing?

Yes. A stretched timing chain gives codes like P0016. Then a new sensor won’t help.

Does the whole camshaft need replacing?

No. According to the ANWB, the Dutch motoring club, the sensor can usually be replaced on its own.

See also

Was this helpful?

· 2 sources · In het Nederlands

Sources

All sources checked on 19 November 2026.

  1. ANWB, Camshaft sensor (Dutch)
  2. HELLA Tech World, Camshaft sensor