- How bad
- Within a month
- Do it yourself
- No, that is a garage job
- Usually
- Weak battery or poor battery terminals
- Garage
- usually €118
What you notice
- The engine warning light or another light is on
- ABS or stability control light is on
- Automatic gearbox shifts strangely
- Cruise control does not work
What usually causes it
| Cause | Likelihood |
|---|---|
| Weak battery or poor battery terminals · €118 | Common |
| Another fault in the engine computer with its own P code | Common |
| Poor connector or earth connection on a module | Sometimes |
| Outdated software in the engine computer | Sometimes |
| Faulty engine computer | Rare |
A code points to the area. Sometimes the garage only finds the real cause after that.
How to fix it
Start with what costs least.
- 1Read out all the modules, including those outside the engine. Note which module reports U0401.
- 2Measure the battery voltage. The app shows it live, also while starting.
- 3Fix the P codes in the engine computer first.
- 4Check the earth cables and the engine computer connectors.
- 5Ask the dealer whether there is a software update for the engine computer.
What to ask the garage
- Which other codes are stored, and can I have the printout?
- Which measurement shows that this is the cause?
- What does an original part cost, and what does a pattern part cost?
- What will it cost if you find more? Call me before you go ahead.
If you wait
The active code disappears as soon as the fault is gone. It clears from the memory after a set number of ignition cycles without the fault.
The data line tests run at 9 to 16 V. So a weak battery can play a part.
Code appears
Read the engine computer for P codes.
Engine code fixed
U0401 disappears from the active faults.
At the APK
The OBD check only looks at codes starting with a P.
What it costs
It depends on the cause. Where do the prices come from? ›
| Part | At the garage | Part only |
|---|---|---|
| Battery | Garage €118 | Part none |
Background

How it works ›
What invalid data is
Modules in the car constantly receive data from other modules over the data line. The receiver checks whether that data is plausible. If it sees something impossible, it sets an invalid data code.
With U0401, that data came from the engine computer. So the connection itself works.
What the code does and does not tell you
For this group of codes, the Saab factory manual says there is no wiring to measure. The cause lies in the module sending the data, or in how a module is configured.
So read out the engine computer itself first. If it has a P code stored, fix that.
In numbers
Questions
What is the difference between U0100 and U0401?
With U0100 there is no contact with the engine computer at all. With U0401 there is contact, but the data is wrong.
Can a flat battery cause U0401?
Yes. At low voltage, modules sometimes send nonsense over the network. So have the battery tested first.
Will U0401 fail the APK (the Dutch MOT)?
A U code on its own does not count. When reading the codes, the APK inspector looks for stored P codes. If this fault also sets P codes, a normal exhaust gas test follows.
See also
Was this helpful?
· 2 sources · In het Nederlands
Sources
All sources checked on 19 November 2026.
How we set prices ›
The amounts come from prices that Dutch garages and webshops publish on their own sites, including VAT, or from the source shown next to them. Last collected on 19 November 2026. Your own price depends on your engine and year, so always ask for a quote. The ANWB (the Dutch motoring club) gives an average, which is not a real price, so we leave it out. If your garage asks something very different, email it to hallo@vroomdoctor.com.