Skip to contentBlack Friday · Reserve for €59 €69 after launch Reserve ›

Problems with the Ford 1.0 EcoBoost engine

The engine loses coolant and gets too hot. Driving on can cost you the cylinder head. It affects the Ford 1.0 EcoBoost from 2012, whose belts also run in oil.

Check your number plate (Dutch) ›

Which cars

  • Ford 1.0 EcoBoost three-cylinder (100, 125 and 140 hp), from 2012
  • Ford Fiesta, Focus, C-Max, B-Max, EcoSport and Mondeo with this engine
  • From around 2018, some newer versions got a timing chain
  • According to the ANWB, the Dutch motoring club, the 1.5 EcoBoost has its own coolant loss problem

The problems

Head or head gasket damaged after overheatingStop
What you notice
White smoke from the exhaust, coolant disappears with no visible leak, engine runs on three cylinders.
Cause
Driving on with too little coolant makes the cylinder head warp or crack.
Fix
Have the head skimmed and a new head gasket fitted. If the head is cracked, you need a different engine.
Coolant gone, engine too hotThis week
What you notice
Coolant level drops, temperature gauge rises, coolant light comes on, steam or a sweet smell under the bonnet.
Cause
Under heavy load the 1.0 EcoBoost overheats quickly, according to the ANWB. With too little coolant, engine damage soon follows.
Fix
Find the leak first, with a pressure test. Replace the leaking hose or part. Then have the head gasket checked.
Timing belt and oil pump belt wear in the oilThis week
What you notice
Low oil pressure warning, sluggish acceleration, belt teeth in the oil strainer.
Cause
Both belts run in oil. Wrong or dirty oil weakens them. On the oil pump belt, the tensioner arm can also break off. Loose bits clog the oil strainer.
Fix
Replace the belt on time, earlier than the 240,000 km in the book. Have the oil strainer checked. In Germany Ford sometimes gives goodwill up to 160,000 km and 72 months, but only with a full service book.

Check this now (or before you buy)

  1. Check the coolant level every month, with a cold engine.
  2. Check the oil level. Ask which oil went in (Ford spec WSS-M2C948-B or WSS-M2C954-A1).
  3. Ask whether the timing belt has been replaced.
  4. Keep an eye on the temperature gauge on the road, especially with a trailer or in the mountains.
  5. Ask a Ford dealer, with the chassis number, about open recalls.

If you wait

  1. Coolant level drops

    The coolant light comes on, or the temperature gauge climbs.

  2. Engine gets too hot

    The cylinder head warps. The head gasket starts to leak.

  3. Head cracks

    Coolant disappears without a visible leak. White smoke comes from the exhaust.

  4. Oil pressure is lost

    If the oil pump belt breaks, you lose power and brake assist. The engine gets damaged.

Background

RadiatorExpansion tankThermostatWater pumpEngineHotCooled
How the engine cooling works
How it works ›

Why the engine gets too hot so quickly

The 1.0 EcoBoost is a small turbo three-cylinder, with 100, 125 or 140 hp. The ANWB calls it prone to overheating under heavy load.

If you lose coolant, the temperature climbs fast. If you drive on, the cylinder head can warp or crack.

Two belts in oil

The timing belt and the oil pump belt both run in the engine oil. Wrong or dirty oil weakens the rubber.

Loose bits can clog the oil strainer. On the oil pump belt, the tensioner arm can also break off. Then oil pressure is lost.

What you can do yourself

Use oil with Ford spec WSS-M2C948-B or WSS-M2C954-A1. Workshops advise fresh oil every year, or after 15,000 km at most.

Have the belt replaced around 8 years, to be safe. Ford’s book says up to 240,000 km.

In numbers

1.0 EcoBoost power outputs
100, 125 and 140 hp1
Belt according to Ford
Up to 240,000 km or 10 years3
Workshop advice on the belt
Replace as a precaution after 8 years2
Workshop advice on oil
Every year, 15,000 km at most2
Oil
5W-20 WSS-M2C948-B or 0W-20 WSS-M2C954-A12
Ford Germany goodwill
Up to 160,000 km and 72 months2
Timing chain
On some engines from mid-20182
Oil pump belt recall (US)
About 139,000 Focus and EcoSport5

Questions

What is the biggest problem with the 1.0 EcoBoost?

Overheating from coolant loss. If you drive on with too little coolant, the cylinder head can crack. Then the damage is big.

When does the timing belt on the 1.0 EcoBoost need replacing?

Ford says up to 240,000 km or 10 years. The belt runs in oil, so a workshop in Auto Bild advises replacing it after 8 years already.

What does a timing belt cost for a 1.0 EcoBoost?

Garages that publish their price ask €379 to €899 for a new timing belt, the same for every engine. On the EcoBoost it’s more work than with a dry belt. The engine has to come further apart.

Does my Fiesta or Focus have a belt or a chain?

Up to around 2018, usually a belt in oil. Some newer versions got a chain. Your garage can tell from the engine code.

Does the APK (the Dutch MOT) fail an EcoBoost for coolant?

Sometimes. If coolant drips on the ground, that can mean a fail. A low level on its own doesn’t. Do have it checked straight away.

See also

Was this helpful?

· 6 sources · In het Nederlands

Sources

All sources checked on 19 November 2026.

  1. ANWB: EcoBoost engine (Dutch)
  2. Auto Bild: Timing belt problems on the Ford EcoBoost
  3. TopGear NL: What is a wet timing belt (Dutch)
  4. Ford: Recall 23S64 EcoSport and Focus oil pump
  5. The Drive: Ford 1.0 EcoBoost oil pump belt recall
  6. Motor.es: Ford 1.0 EcoBoost belts in oil (Spanish)