- How bad
- This week
- Do it yourself
- No, that is a garage job
- Garage
- Depends on the cause
What you notice
- The engine warning light is on
- The gearbox warning light may be on
- Jerky or late gear changes
- The gearbox stays stuck in one gear
What usually causes it
| Cause | Likelihood |
|---|---|
| Fault in a gearbox sensor or shift valve | Common |
| Too little or old transmission fluid | Common |
| Low battery voltage or a poor earth · €118 | Sometimes |
| Damaged wiring or connector to the gearbox | Sometimes |
| Internal damage in the gearbox | Rare |
A code points to the area. Sometimes the garage only finds the real cause after that.
How to fix it
Start with what costs least.
- 1Read the gearbox computer separately. That is where the actual fault code is.
- 2Have the fluid level and the colour of the gearbox fluid checked.
- 3Check that the connector on the gearbox is clean and dry.
- 4If the fluid is old or dark, have it changed.
- 5If there is internal damage, have an automatic gearbox specialist look at it.
What to ask the garage
- Which other codes are stored, and can I have the printout?
- Which measurement shows that this is the cause?
- What will it cost if you find more? Call me before you go ahead.
If you wait
What the gearbox does depends on the fault behind it. With a fault in a speed sensor, the Saab 9-4X limits the gearbox to fifth gear and reverse.
According to the ANWB (the Dutch motoring club), a gearbox overhaul costs about 2,500 euros, including fitting.
Code appears
On a Saab the engine warning light comes on immediately. Have the gearbox codes read.
Gearbox in limp mode
You only have one gear left. Drive gently to a garage.
At the APK
With a P code, the APK (the Dutch MOT) inspector measures the exhaust gases the normal way.
What it costs
It depends on the cause. Where do the prices come from? ›
| Part | At the garage | Part only |
|---|---|---|
| Battery | Garage €118 | Part none |
Background
How it works ›
What P0700 tells you
The automatic gearbox has its own computer. It cannot turn on the engine warning light itself. If it finds a fault that affects emissions, it asks the engine computer over the data line to turn the light on.
The engine computer then sets P0700. It knows nothing more about what the fault is. The actual code is in the gearbox computer.
What you need to read
Read the gearbox computer with a tool that can access it. A basic OBD reader often only sees the engine computer.
On a Saab, communication codes in the gearbox, the U codes, can also give P0700. The freeze frame data stored with P0700 shows how the engine was running when the gearbox saw the fault.
In numbers
Questions
What exactly does P0700 mean?
It is a pass-through code. The gearbox computer tells the engine computer that something is wrong. It does not say what is wrong.
Can I read P0700 with a basic scanner?
P0700 itself, yes. For the actual cause you need a scanner that can read the gearbox computer.
What does a transmission fluid change cost?
That depends on the gearbox and the amount of fluid. Ask for a price in advance.
See also
Was this helpful?
· 5 sources · In het Nederlands
Sources
All sources checked on 19 November 2026.
- Saab WIS, 9-4X 2011 V6: DTC P0700 (factory manual)
- Saab WIS, 9-4X 2011 automatic 6T70: DTC P0716 or P0717 (factory manual)
- ANWB, Gearbox (in Dutch)
- Saab WIS, 9-4X 2011: Powertrain DTC Type Definitions (factory manual)
- RDW, APK manual Regulations, articles 42 and 45a to 45g (version from 1 January 2024) (in Dutch)
How we set prices ›
The amounts come from prices that Dutch garages and webshops publish on their own sites, including VAT, or from the source shown next to them. Last collected on 19 November 2026. Your own price depends on your engine and year, so always ask for a quote. The ANWB (the Dutch motoring club) gives an average, which is not a real price, so we leave it out. If your garage asks something very different, email it to hallo@vroomdoctor.com.