- If it stays on
- A fault in the gearbox. It often stays stuck in one gear.
- If it flashes
- On some brands a serious fault. Don’t drive further than you need to.
- Read it yourself
- Yes, with an OBD reader
- Garage
- €27 to €55 to read it
What the light does
- Flashes
- On some brands a serious fault. Don’t drive further than you need to.
- Stays on
- A fault in the gearbox. It often stays stuck in one gear.
- On after heavy pulling or traffic jams
- The oil is too hot. Let the engine idle for a while, or stop.
What usually causes it
| Cause | Likelihood |
|---|---|
| Gearbox oil too hot or too old | Common |
| Faulty sensor or selector switch | Sometimes |
| Fault in the gearbox control (mechatronics or valve body) | Sometimes |
| Worn clutches in a DSG gearbox · €449 | Sometimes |
How to deal with it
- 1Stop somewhere safe and put the gearbox in P. Does the car say the gearbox is too hot? Then let the engine run until the message is gone. With another fault: engine off, start again after a few minutes.
- 2Read the code. P0700 means the gearbox computer has a code of its own. Read that module too.
- 3Not changed in a long time? Have the gearbox oil changed.
- 4Mechatronics or clutch of a DSG gearbox broken? That’s a big repair. Ask for a quote first.
If you keep driving
Message or light
A fault, or the gearbox is too hot. Stop somewhere safe.
You keep driving with a hot gearbox
The car shifts abruptly and often, or starts jerking.
Maximum temperature reached
The clutch disengages until the gearbox has cooled.
Message keeps flashing
Get the gearbox checked at a workshop.
What it costs
It depends on the cause. Where do the prices come from? ›
| Part | At the garage | Part only |
|---|---|---|
| Clutch | Garage €449 | Part €109 |
Background
How it works ›
Kinds of automatic
A conventional automatic shifts with a torque converter, a fluid coupling. An automated manual is a normal gearbox where a computer and hydraulics work the clutch and shift.
A dual-clutch automatic is two gearboxes, one for the even and one for the odd gears, each with its own clutch. The DSG from the Volkswagen group is the best-known example. A CVT has no fixed gears.
What the light means
The gearbox computer watches the temperature and operation of the gearbox. With a fault or a high temperature, the light comes on or a message appears.
In a dual-clutch gearbox the clutch temperature rises quickly if you often stop and pull away on a steep hill, or hold the car on a hill with the accelerator. According to Kia the car then drives less smoothly. You get a message and a buzzer.
Kia says to stop safely, put the gearbox in P and let the engine run until the gearbox has cooled. If you keep driving, the clutch disengages until the temperature is normal again.
What a repair costs
If the gearbox doesn’t shift smoothly, grinds or jumps out of gear, the synchro rings, bearings or gears may be worn. An overhaul costs about €2,500 including fitting according to the ANWB.
A used gearbox is sometimes cheaper than an overhaul. On a Peugeot, a serious fault in the automatic transmission is one of the messages that turn on the red STOP light. Stop the car then.
In numbers
Questions
Can I keep driving with the gearbox light on?
Calmly home or to the garage, yes. Loading it heavily in limp mode can damage the gearbox further.
What does P0700 mean?
The gearbox computer has stored a fault of its own. Read that module separately to find the real cause.
See also
Was this helpful?
· 3 sources · In het Nederlands
Sources
All sources checked on 19 November 2026.
How we set prices ›
The amounts come from prices that Dutch garages and webshops publish on their own sites, including VAT, or from the source shown next to them. Last collected on 19 November 2026. Your own price depends on your engine and year, so always ask for a quote. The ANWB (the Dutch motoring club) gives an average, which is not a real price, so we leave it out. If your garage asks something very different, email it to hallo@vroomdoctor.com.